NASA has announced it reconnected with the Voyager 1 spacecraft after a brief and tense period of radio silence. The spacecraft recently turned off one of its two radio transmitters – and experts are now trying to discover what happened.
Voyagers 1 and 2 have been flying for more than 47 years and are the only two spacecraft to operate in interstellar space. Their advanced age has meant an increase in the frequency and complexity of technical issues and new challenges for the mission engineering team.
They believe the transmitter shut-off was caused by the spacecraftâs fault protection system, which autonomously responds to onboard issues. For example, if the spacecraft overdraws its power supply, fault protection will conserve power by turning off systems that arenât essential for keeping it flying. But it may take days to weeks before the team can identify the underlying issue that triggered the fault protection system.
READ MORE: Nasa captures incredible image of star ‘5000 times brighter than the Sun’
When the flight team, which is based at NASAâs Jet Propulsion Laboratory in Southern California, beams instructions to the spacecraft via the agencyâs Deep Space Network, Voyager 1 sends back engineering data that the team assesses to determine how the spacecraft responded to the command. This process normally takes a couple of days â almost 23 hours for the command to travel more than 15 billion miles (24 billion kilometres) from Earth to the spacecraft, and another 23 hours for the data to travel back.
On October 16, the flight team sent a command to turn on one of the spacecraftâs heaters. While Voyager 1 should have had ample power to operate the heater, the command triggered the fault protection system. The team learned of the issue when the Deep Space Network couldnât detect Voyager 1âs signal on October 18.
The spacecraft typically communicates with Earth using whatâs called an X-band radio transmitter, named for the specific frequency it uses. The flight team correctly theorised that the fault protection system had lowered the rate at which the transmitter was sending back data. This mode requires less power from the spacecraft, but it also changes the X-band signal that the Deep Space Network needs to listen out for. Engineers found the signal later that day, and Voyager 1 otherwise seemed to be stable as the team began to investigate what had happened.
Then, on October 19, communication appeared to stop entirely. The flight team suspected that Voyager 1âs fault protection system was triggered twice more and that it turned off the X-band transmitter and switched to a second radio transmitter called the S-band. While the S-band uses less power, Voyager 1 had not used it to communicate with Earth since 1981. It uses a different frequency than the X-band transmitters signal is significantly fainter. The flight team was not certain the S-band could be detected at Earth due to the spacecraftâs distance, but engineers with the Deep Space Network were able to find it.
Rather than risk turning the X-band back on before determining what triggered the fault protection system, the team sent a command on October 22 to confirm the S-band transmitter is working. The team is now working to gather information that will help them figure out what happened and return Voyager 1 to normal operations.
EMEA Tribune is not involved in this news article, it is taken from our partners and or from the News Agencies. Copyright and Credit go to the News Agencies, email news@emeatribune.com Follow our WhatsApp verified Channel